• Ultra Wide: Wider distance between tie bar and clamping stroke with the usage of square platen. Suitable for larger variety of molds and capacitate in molding process.
• Ultra Durable: Increased durability through the application of new series toggle system upon Finite Element Analysis (FEA), high strength to increase lifespan of tie bars and assure quality of products.
• Ultra Clean: Usage of oil-less bearings on moving parts of platen and toggle boosts cleanliness and also helps to save on cleaning efforts and eliminate cost of lubricating oils. (HT-100I~HT-200I)
• Ultra Strong: All new high rigid structure frame, design upon Finite Element Analysis (FEA) of stress and strain affect. Assure the excellent of frame structure, the HT series were capable of this advantage improvement.
• Ultra Flexible: New frame structure comes with bigger product delivery space. This makes for installation of auxiliary equipments and is compatible with conveyors from multi direction to allow easier automation.
• Ultra Safe: Safety is enhanced by applying the exclusively designed non-adjusting safety bar and low-pressure protection loop.
• Ultra Intelligent: Equipped with the new FCS-2100 controller that has the capabilities for semi-close loop or close loop option, user-friendly graphic operation interface, online curve detection and centrally managed web link, this machine is ultra-smart!
• Ultra Save: Injection unit adapted with the patented regeneration loop. If Hi-Speed mode (Type I) is selected, it eliminates the consumption of oil return, and improves injection speed. When the Hi-pressure Mode (Type II) is selected, it permits higher injection pressure. This patented feature allows the same console to be operated for high injection speed products and high injection pressure products at the same time to significantly expand the applications of the console.
• Ultra Stable: Semi-close loop (above HT-600I) and high efficiency cooling system are more reliable in molding process.
• Ultra Easy: Easy nozzle alignment after injection carriage improved. Easy care and maintenance. Modularized power, hydraulic, mechanical components, easy care.

　

Items		Unit	HT-350I			HT-450I			HT-600I			HT-700I
Injection Unit
Screw Type		mm	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter		mm	62	68	75	68	75	80	75	85	95	85	95	105
Screw Stroke		mm	306			340			380			430
Theoretical Shot Volume		cm³	865	1111	1351	1234	1501	1708	1678	2155	2691	2439	3046	3721
Shot Weight of Injection(ps)		gram	849	1021	1242	1134	1372	1561	1518	1950	2435	2206	2755	3366
Injection Pressure	I	kgf/cm²	1962	1524	1253	1976	1630	1432	1991	1551	1241	1974	1436	1175
Injection Speed		mm/sec	93			91			95			92
Injection Rate		cm³/sec	281	338	411	330	402	457	419	539	673	522	652	796
Injection Pressure	II	kgf/cm²	2550	1985	1632	2471	2038	1791	2489	1939	1552	2468	1796	1470
Injection Speed		mm/sec	72			73			76			74
Injection Rate		cm³/sec	217	261	318	265	322	367	336	431	538	420	524	640
Plasticizing Capacity(ps)		kg/hr	140	170	205	170	225	263	243	330	470	389	500	637
Screw Rotation Speed		rpm	142			170			160			170
Mould Clamping Unit
Mould Clamping Unit		tonf	350			450			600			700
Mould Clamping Stroke		mm	645			730			900			1000
Dry Run Cycle		sec	3.2			3.5			4.5			10
Mould Thickness		mm	190-790			250-800			300-1100			350-1100
Suggested Minimum Mold Dim.(HxV)		mm	429x429			475x475			560x560			625x625
Distance Between Tie Bars(HxV)		mm	660x660			760x760			860x860			980x980
Mould Platen(HxV)		mm	969x969			1120x1120			1290x1290			1440x1440
Ejector Stroke		mm	200			200			220			240
Electrical Equipment
Pump Driving Motor		HP(kw)	50 (37.30)			60 (44.76)			75 (55.95)			100 (74.6)
Temperature Controller		(range) set	(0-400°C)x5			(0-400°C)x6			(0-400°C)x7			(0-400°C)x7
Heater Capacity		kw	22.43			28			33			40
Others
Machine Dimensions(LxWxH)		mm	7910x1730x2340			7800x2000x2200			8500x2200x2680			11000x2200x2800
Oil Tank Capacity		liter	830			1000			1190			1270
Machine Weight		metric tons	14			19			24			40
Max. System Pressure		kgf/cm²	140			140			140			140

*The shot weight is based on polystyrene at specific gravity of 1.05.
*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.