• By Computer Aided Design (CAD) clamping system, the clamp stroke and distance between tie bars have been enlarged for versatile usage.
• Machines are equipped with up-down toggle system for high speed molding.
• Linear potentiometer can reach 0.01mm high accuracy, and all position settings can be saved into the computer, suitable for high precision molding.
• Fully automatic lubrication device ensures excellent lubricating effect and assures machine's accuracy.
• Ring gear and hydraulic motor driving are for quick die height adjustment.
• Hydraulic ejector is time retaining, vibration, position retain functions, and an air blasting ejector can be added.
• Core pull and unscrewing device have multi-sequence design, suitable for all kinds of molds.
• Installed with sliding clamp system cover, easy for inspection and maintenance.

Injection Unit:

• Suitable for thermosetting plastic material, double-function for exchanging between thermo-plastic and thermosetting.
• By linear potentiometer for 0.01mm high precision position control for injection and clamping systems.
• Use of oil heating circulation and electric heating for barrel, ensures the stability of temperature control.
• Specialized screw & barrel for thermosetting, special treated steel of barrel set for anti-erosion when in use of thermosetting material.
• Built-in cold start protection, loop break alarm and heat reservation function, the tolerance of temperature deviation is ±1°C only.
• High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
• Bad product detecting function to recognize short-shot or other unnormal products
• Special design of nozzle for quick-clearing purpose when machines suspended.

Electrical Unit:

• Electrical, hydraulic and mechanical safety devices consist tri-interlock safety system.
• Emergency stop on operation & rear sides.
• Low pressure mold opening & closing protection.
• Hydraulic overheating alarm & automatic shut-down devices.
• By microprocessor controller equipped with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
• Shut-down memorized device with 100 memory presets on molding data.
• EL display of pressure, speed time and distance for each motion.
• Screw rotating speed read-out.

Item	Unit	FT-60U		FT-90U		FT-110U		FT-140U
Injection Unit
Screw Diameter	mm	28	30	32	36	36	40	40	45
Injection Pressure	kg/cm²	1857	1618	2297	1815	2204	1785	2297	1815
Theoretical Shot Volume	cm³	89	102	121	153	173	214	251	318
Shot Weight of Injection (PS)	grams	107	125	146	184	208	258	302	383
	oz	3.8	4.4	5.1	6.5	7.3	9.0	10.6	13.4
Injection Rate	cm³/sec	60	70	64	81	83	102	97	122
Plasticizing Capacity	kg/hr	37	42	43	55	46	57	46	58
Screw Rotation Speed	rpm	260		210		195		158
Clamping Unit
Clamping Force	metric tons	60		90		110		140
Clamping Strokes	mm	270		300		350		380
Dry Run Cycle	sec	1.8		1.8		1.8		1.8
Mold Thickness	mm	75-340		100-390		110-440		110-500
Suggested Minimum Mold. Dim.(HxV)	mm	210x170		230x195		255x220		275x240
Distance Between Tie Bars(HxV)	mm	320x260		350x300		390x340		420x370
Mold Platen(HxV)	mm	475x415		520x470		590x540		650x600
Ejector Stroke	mm	70		80		90		100
Electrical Equipment
Pump Driving Motor	HP(kw)	10(7.46)		15(11.19)		15(11.19)		20(14.92)
Temperature Controller	(range) set	(0-400°C) x3		(0-400°C) x3		(0-400°C) x4		(0-400°C) x4
Others
Machine Dimensions (LxWxH)	mm	3900x1000x 1700		4350x1050x 1760		4800x1100x 1800		5300x1250x 1924
Oil Tank Capacity	liter	135		190		230		260
Machine Weight	metric tons	2.5		3.5		4.5		5.5
Pump Pressure	kg/cm²	105		140		140		140

*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.