PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.

Machine and Accessories:

• Dehumidifying dryer and auto loader system for material.
• Environment dehumidifying dryer system.
• Chiller system.
• Mold and hot runner temperature controller system.
• Automatic system.

• Special injection construction designed to benefit for plasticizing.
• By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
• By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
• Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
• Shut-down memory is able to store up to 100 preset mold data memory.
• Higher stability and lower defect in PET preform dimension.

Item	Unit	FT-220ZP	FT-320P	FT-320LP	FT-420P
Injection Unit
Screw Diameter	mm	85	80	90	90
Injection Pressure	kg/cm²	1250	1365	1119	1119
Theoretical Shot Volume	cm³	1644	1407	1780	1780
Shot Weight of Injection	grams	1957	1552	2025	2025
	ozs	68	54.6	71.3	71.3
Injection Rate	cm³/sec	566	540	820	820
Plasticizing capacity(ps)	kg/hr	361	372	558	558
Screw Rotation Speed	rpm	122	150	165	165
Clamping Unit
Clamping Force	metric tons	40	320		420
Clamping Strokes	mm	1200	600		670
Dry Run Cycle	sec	4	3		3.5
Mold Thickness	mm	500-950	300-780		250-800
Suggested Min. Mold Dim. (HxV)	mm	340 x 300	420 x 360		460 x 400
Distance between Tie Bars (HxV)	mm	520 x 460	650 x 550		715 x 615
Mold Platen (HxV)	mm	800 x 740	980 x 890		1075 x 975
Ejector Stroke	mm	210	190		200
Electrical Equipment
Pump Driving Motor	HP(kw)	75(56)	75(56)	100(74.6)	100(74.6)
Temperature Controller	(range)set	(0-400°C) x5	(0-400°C) x5		(0-400°C) x5
Heater Capacity	kw	29	29		29
Others
Machine Dimensions (LxWxH)	mm	8000 x 1400 x 2200	8800 x 2000 x 2200		9200 x 2000 x 2200
Oil Tank Capacity	liter	830	830		990
Machine Weight	metric tons	12	15		20
Pump Pressure	kg/cm²	140	140		140

*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.