• By Computer Aided Design (CAD) clamping system, the clamp stroke and distance between tie bars have been enlarged for versatile usage.
• Machines are equipped with up-down toggle system for high speed molding.
• Linear potential meter can reach 0.01mm high accuracy, and all position settings can be saved into the computer, suitable for high precision molding.
• Fully automatic lubrication device ensures excellent lubricating effect and assures machine's accuracy.
• Ring gear and hydraulic motor driving are for quick die height adjustment.
• Hydraulic ejector is time retaining, vibration, position retain functions, and an air blasting ejector can be added.
• Core pull and unscrewing device have multi-sequence design, suitable for all kinds of molds.
• Installed with sliding clamp system cover, easy for inspection and maintenance.

Injection Unit:

• Suitable for thermosetting plastic material, double-function for exchanging between thermo-plastic and thermosetting.
• By linear potentiometer for 0.01mm high precision position control for injection and clamping systems.
• Use of oil heating circulation and electric heating for barrel, ensures the stability of temperature control.
• Specialized screw & barrel for thermosetting, special treated steel of barrel set for anti-erosion when in use of thermosetting material.
• Built-in cold start protection, loop break alarm and heat reservation function, the tolerance of temperature deviation is ±1°C only.
• High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
• Bad product detecting function to recognize short-shot or other unnormal products
• Special design of nozzle for quick-clearing purpose when machines suspended.

Electrical Unit:

• Electrical, hydraulic and mechanical safety devices consist tri-interlock safety system.
• Emergency stop on operation & rear sides.
• Low pressure mold opening & closing protection.
• Hydraulic overheating alarm & automatic shut-down devices.
• By microprocessor controller equipped with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
• Shut-down memorized device with 100 memory presets on molding data.
• EL display of pressure, speed time and distance for each motion.
• Screw rotating speed read-out.

　

Item	Unit	FT-180U		FT-220U		FT-260U		FT-320U
Injection Unit
Screw Diameter	mm	48	55	57	62	62	68	70	75
Injection Pressure	kg/cm²	2051	1562	1842	1557	1821	1514	1783	1553
Theoretical Shot Volume	cm³	380	499	536	634	755	908	1078	1237
Shot Weight of Injection (PS)	grams	458	601	645	763	909	1093	1297	1489
	oz	16.1	21.1	22.6	26.8	32	38.5	45.7	52.4
Injection Rate	cm³/sec	130	170	180	213	240	288	297	341
Plasticizing Capacity	kg/hr	73	95	130	154	185	223	266	306
Screw Rotation Speed	rpm	142		142		150		150
Clamping Unit
Clamping Force	metric tons	180		220		260		320
Clamping Strokes	mm	420		450		520		600
Dry Run Cycle	sec	1.8		2		2.5		3
Mold Thickness	mm	120-560		200-650		150-700		250-730
Suggested Minimum Mold. Dim. (HxV)	mm	300x275		340x300		370x310		420x360
Distance Between Tie Bars (HxV)	mm	460x420		520x460		570x480		650x550
Mold Platen (HxV)	mm	725x685		800x740		870x780		980x890
Ejector Stroke	mm	125		145		160		190
Electrical Equipment
Pump Driving Motor	HP(kw)	25(18.65)		30(22.38)		40(29.84)		50(37.3)
Temperature Controller	(range) set	(0-400°C) x4		(0-400°C) x4		(0-400°C) x4		(0-400°C) x4
Others
Machine Dimensions (LxWxH)	mm	5950x1300x 2225		6200x1400x 2300		6500x1500x 2100		7200x1600x 2200
Oil Tank Capacity	liter	300		420		510		780
Machine Weight	metric tons	7.5		8.8		12.6		13.1
Pump Pressure	kg/cm²	140		140		140		140

*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.