Other features include:

• Two isolated barrel sets inject at the same time, thereby reducing cycle time. The shorter cycle time increases productivity of the machine and hence helps to yield bigger profits.
• With an accuracy reaching 0.01mm, linear potentiometers are used in the two injection sets and clamping molds to accurately control the injection process and the closing and opening of molds.
• By PRO/ENGINEER computer aid designed clamping system, the clamp stroke and distance between bars have been enlarged for verstaile usage.
• High torque and excellent performance of hydraulic motor can drive screw directly, thus shortening plasticizing time and saving energy.
• Using only the finest steel and innovative ion-nitriding process, the hardness of screw and barrel reaches above HV950 to ensure high wear resistance.
• Superior hydraulic design system ensures the decrement of the tube pressure. Assembled with pump and motor, it can lower the machine's noise to 80DB below.
• With features such as limitations for screw cold starts, broken wire detection, etc., a PID temperature controller is used to control the temparature at ±1°C.
• Using water distributor with thermometer, molding quality can be improved through well control of temperature.
• Fully automatic lubrication device ensures excellent lubricating effect and assures machine's accuracy.
• Bad product detecting function recognizes short-shot or other abnormal products.
• Larger product dropping passage allows the machine be adoptable to to use with conveyor for fully automatic production.
• With insert function, this type of machine can produce triple colored products.

　

Item	Unit	FB-140T			FB-220T
		A B			A	B
Injection Unit
Screw Diameter	mm	26	28	30	42	42
Injection Pressure	kgf/cm²	2306	1988	1732	1500	1500
Theoretical Shot Volume	cm³	69	80	92	220	220
Shot Weight of Injection (ps)	gram	63	74	85	202	202
	ozs	2.2	2.6	3	7	7
Injection Rate	cm³/sec	46	53	61	107	107
Plasticizing Capacity (ps)	kg/hr	25	29	33	48	48
Screw Rotation Speed	rpm	240			155
Mould Clamping Unit
Mould Clamping Force	metric ton	140			220
Mould Clamping Strokes	mm	380			450
Mould Thickness	mm	150-480			200-500
Distance b/w Tie Bars (HxV)	mm	420x370			520x460
Mould Platen (HxV)	mm	650x600			800x740
Ejector Stroke	mm	70			70
Distance between barrel centers	mm	200			300
Distance between Ejector	mm	150			300
Electrical Equipment
Pump Driving Motor	HP(KW)	30 (22.38)			40 (29.84)
Temperature Controller	(RANGE)SET	2-(0-400°C)x3			2-(0-400°C)x4
Heater Capacity	KW	4x2			8x2
Others
Machine Dimensions (LxWxH)	mm	5300x1350x1924			6500x1570x2100
Oil Tank Capacity	liter	400			500
Machine Weight	metric ton	5.5			10
Max. System Pressure	kgf/cm²	140			140

*The shot weight is based on polystyrene at specific gravity of 1.05.
*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.