PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.

Machine and Accessories:

• Dehumidifying dryer and auto loader system for material.
• Environment dehumidifying dryer system.
• Chiller system.
• Mold and hot runner temperature controller system.
• Automatic system.

• Special injection construction designed to benefit for plasticizing.
• By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
• By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
• Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
• Shut-down memory is able to store up to 100 preset mold data memory.
• Higher stability and lower defect in PET preform dimension.

Item	Unit	FT-140P	FT-180SP	FT-180P	FT-220P	FT-220LP
Injection Unit
Screw Diameter	mm	45	45	52	62	68
Injection Pressure	kg/cm²	1814	1814	1747	1557	1514
Theoretical Shot Volume	cm³	317	317	445.7	633	908
Shot Weight of Injection	grams	360	360	507	716	1032
	ozs	12.6	12.6	17.8	25.2	36.3
Injection Rate	cm³/sec	122	145	185.7	272.6	340.3
Plasticizing capacity(ps)	kg/hr	58	86	137.3	227.7	286.6
Screw Rotation Speed	rpm	140	188	174	184	176
Clamping Unit
Clamping Force	metric tons	140	180		220
Clamping Strokes	mm	380	420		450
Dry Run Cycle	sec	1.8	1.8		2
Mold Thickness	mm	110-500	120-560		220-650
Suggested Min. Mold Dim. (HxV)	mm	275 x 240	300 x 257		340 x 300
Distance between Tie Bars (HxV)	mm	420 x 370	460 x 420		520 x 460
Mold Platen (HxV)	mm	650 x 600	725 x 685		800 x 740
Ejector Stroke	mm	100	145		160
Electrical Equipment
Pump Driving Motor	HP(kW)	20(15)	20(18.65)	30(22.38)	40(29.84)	50(37.3)
Temperature Controller	(range)set	(0-400°C) x4	(0-400°C) x4	(0-400°C) x5	(0-400°C) x5	(0-400°C) x5
Heater Capacity	kw	7.1	12	16.1	22.1	27.6
Others
Machine Dimensions (LxWxH)	mm	5300 x 1250 x 1924	6000 x 1300 x 2250	6150 x 1300 x 2225	6400 x 1400 x 2300	6500 x 1400 x 2300
Oil Tank Capacity	liter	260	300	350	470	510
Machine Weight	metric tons	5.5	7	7.6	11.5	12
Pump Pressure	kg/cm²	140	140	140	140	140

*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.