To cater to the increasing requirements of
the bottle closure market, FCS had been continuously researching and
improving on the associated technical aspects, resulting in the ultra-high
speed FCS-CAP Series. In this series, the newly launched FCS-CAP16/28
closure production system uses a 16-cavity mold for mineral water bottle
caps. The system's cycle time has been shortened substantially to 4.5 to
4.8 seconds, breaking the record of 6.1 seconds for this industry. The
monthly output for this efficient system is 9 million caps.
- It comprises of 3 major sub-systems:
AD-150 tripe-loop fast cycle injection molding machine, a 16-cavity
mold, and the patented FS-CB250 bottle cap-cutting machine. ( Mold and
bottle cap-cutting machine are provided by Fu Hsian Industrial Co.,
Ltd.)
- Triple Loop Hydraulic system: By using
a triple-loop design, material charging is done during mold
opening/closing and ejection, which reduces the cycle time.
- Three Axis Simultaneous Movement: It is
the key to the high performance of this production system and able to
raise output by over 21%.
- Shut-Off Nozzle: Designed with high
performance shut-off nozzle and 100% prevent leakage.
- New Injection Carriage: To prevent
barrel tilted and nozzle raised.
- Application: Suitable for narrow-neck
bottles (mineral water, juices, carbonated drinks) with capacity of
350cc, 600cc, 1250cc, 1500cc and 2000cc.
¡@
| Items |
System
Model |
Cap
Mold |
Cycle
Time |
Daily
Output (ten thousand) |
Injection
Molding Machine |
Cutting
Cap Machine |
Chiller |
Compressor |
| Non
Neck Finish |
CAP
16/28N |
28mmx16cav. |
PE:4.5~4.8
PP:5.8~6.2 |
28.5~30.5
22.0~23.5 |
AD-150 |
FS-CB250
250pcs/min. |
(BTU)
5 tons |
Air
Pressure
10HP(5~10kg/cm2) |
| CAP
16/30N |
30mmx16cav. |
| CAP
32/28N |
28mmx32cav. |
PE:6.0~6.5
PP:7.8~8.3 |
42.5~46.1
33.3~35.4 |
AD-250 |
(BTU)
10 tons |
| CAP
32/30N |
30mmx32cav. |
| CAP
12/38N |
38mmx12cav. |
PE:6.0~6.5
PP:9.0~9.5 |
15.6~17.0
10.6~11.2 |
AD-150 |
(BTU)
5 tons |
| Neck
Finish |
CAP
16/28K |
28mmx16cav. |
PE:6.5~7.0
PP:8.0~8.5 |
19.5~21.0
16.0~17.0 |
AD-150 |
None |
(BTU)
5 tons |
| CAP
16/30K |
30mmx16cav. |
| CAP
32/28K |
28mmx32cav. |
PE:9.5~10.0
PP:11.0~11.5 |
27.6~29.1
24.0~25.1 |
AD-250 |
(BTU)
10 tons |
| CAP
32/30K |
30mmx32cav. |
| CAP
12/38K |
38mmx12cav. |
PE:9.5~10.0
PP:11.0~11.5 |
10.0~10.6
8.7~9.1 |
AD-150 |
(BTU)
5 tons |
| CAP
4/48K |
48mmx4cav. |
PE:7.5~8.0
PP:10.5~11.0 |
4.0~4.3
3.0~3.1 |
AD-150 |
(BTU)
5 tons |
| CAP
4/60K |
60mmx4cav. |
PE:8.5~9.5
PP:11.0~11.5 |
3.5~4.0
2.9~3.0 |
AD-150 |
(BTU)
5 tons |
Note 1: N=Non Neck finish, K=Neck
Finish
Note 2: The mold includes hot runner and temperature controller.
Note 3: Air conditiorer and movable frame are optional items.
Note 4: PE cap works with cool-filling. PP cap works with
hot-filling.
Note 5: The daily output counts up 24 hours productions. It is for
reference only.
Note 6: Cap cutting system includes transporter belt. |
|
