To cater to the increasing requirements of the bottle closure market,
FCS had been continuously researching and improving on the associated
technical aspects, resulting in the ultra-high speed FCS-CAP Series. In
this series, the newly launched FCS-CAP16/28 closure production system
uses a 16-cavity mold for mineral water bottle caps. The system's cycle
time has been shortened substantially to 4.5 to 4.8 seconds, breaking the
record of 6.1 seconds for this industry. The monthly output for this
efficient system is 9 million caps.
- It comprises of 3 major sub-systems: AD-150 tripe-loop fast cycle
injection molding machine, a 16-cavity mold, and the patented FS-CB250
bottle cap-cutting machine. ( Mold and bottle cap-cutting machine are
provided by Fu Hsian Industrial Co., Ltd.)
- Triple Loop Hydraulic system: By using a triple-loop design,
material charging is done during mold opening/closing and ejection,
which reduces the cycle time.
- Three Axis Simultaneous Movement: It is the key to the high
performance of this production system and able to raise output by over
21%.
- Shut-Off Nozzle: Designed with high performance shut-off nozzle and
100% prevent leakage.
- New Injection Carriage: To prevent barrel tilted and nozzle raised.
- Application: Suitable for narrow-neck bottles (mineral water,
juices, carbonated drinks) with capacity of 350cc, 600cc, 1250cc,
1500cc and 2000cc.
¡@
| Items |
System
Model |
Cap
Mold |
Cycle
Time |
Daily
Output (ten thousand) |
Injection
Molding Machine |
Cutting
Cap Machine |
Chiller |
Compressor |
| Non Neck Finish |
CAP 16/28N |
28mmx16cav. |
PE:4.5~4.8
PP:5.8~6.2 |
28.5~30.5
22.0~23.5 |
AD-150 |
FS-CB250
250pcs/sec. |
(BTU)
5 tons |
Air Pressure
10HP(5~10kg/cm2) |
| CAP 16/30N |
30mmx16cav. |
| CAP 32/28N |
28mmx32cav. |
PE:6.0~6.5
PP:7.8~8.3 |
42.5~46.1
33.3~35.4 |
AD-250 |
(BTU)
10 tons |
| CAP 32/30N |
30mmx32cav. |
| CAP 12/38N |
38mmx12cav. |
PE:6.0~6.5
PP:9.0~9.5 |
15.6~17.0
10.6~11.2 |
AD-150 |
(BTU)
5 tons |
| Neck Finish |
CAP 16/28K |
28mmx16cav. |
PE:6.5~7.0
PP:8.0~8.5 |
19.5~21.0
16.0~17.0 |
AD-150 |
None |
(BTU)
5 tons |
| CAP 16/30K |
30mmx16cav. |
| CAP 32/28K |
28mmx32cav. |
PE:9.5~10.0
PP:11.0~11.5 |
27.6~29.1
24.0~25.1 |
AD-250 |
(BTU)
10 tons |
| CAP 32/30K |
30mmx32cav. |
| CAP 12/38K |
38mmx12cav. |
PE:9.5~10.0
PP:11.0~11.5 |
10.0~10.6
8.7~9.1 |
AD-150 |
(BTU)
5 tons |
| CAP 4/48K |
48mmx4cav. |
PE:7.5~8.0
PP:10.5~11.0 |
4.0~4.3
3.0~3.1 |
AD-150 |
(BTU)
5 tons |
| CAP 4/60K |
60mmx4cav. |
PE:8.5~9.5
PP:11.0~11.5 |
3.5~4.0
2.9~3.0 |
AD-150 |
(BTU)
5 tons |
Note 1: N=Non Neck finish, K=Neck Finish
Note 2: The mold includes hot runner and temperature controller.
Note 3: Air conditiorer and movable frame are optional items.
Note 4: PE cap works with cool-filling. PP cap works with
hot-filling.
Note 5: The daily output counts up 24 hours productions. It is for
reference only.
Note 6: Cap cutting system includes transporter belt. |
|
