牧草收穫般運車

EUROBOSS

PDF目錄下載

SUPERMATIC-loading system
   Smooth loading system
  • Because the loading comb bars are split in the middle the stress is distributed over more cam rollers and a larger cam control surface.
  • The wide conveyor duct protects the crop and guarantees highest loading performance.
  • Each knife cuts the crop exactly between the dual tines.
  • The cam tracks at each end are circular and ensure smooth, jolt-free running and a long service life.
  • The pickup and loading system are equipped with automatic transmission for reversing.
PONY 1 / 2
Two / three loading comb bars, supported in the middle, cam track at one end. U-shaped feed tines also load short forage reliably
BOSS Junior
Three split loading comb bars, cam track at each end, six-phase conveying and cutting sequence.
BOSS / ERNTEBOSS
Three split loading comb bars, cam track at each end, twelve-phase conveying and cutting sequence. Every other pair of tines is shortened so there are two levels of chopping to save power.
PROFI GP / ERNTEBOSS
Four split loading comb bars, cam track at each end, sixteen-phase conveying and cutting sequence. Loading system is equipped with a central lubrication system.
CUTTING SYSTEM
The original with   s e r r a t e d   b l a d e s
Often copied - never equalled
  • Perfect serrated blades ensure that even after the knife edge is blunt a good chop is still achieved.
  • The curved knife shape delivers a continuous, power-saving cut.
  • The blanket of forage is always cut with precision to protect the crop.
  • SUPERMATIC knife security system: If an object triggers the security system, there is only minimal resistance as the knife moves back (up to 13 cm clearance), and then clicks into place again.

22 knifes (BOSS, ERNTEBOSS)		 PONY
7-knife cutting system, can be removed and fitted quickly, without tools. Curved knives provide the best cutting action.
BOSS Junior
Up to 12 quick-change knives.
Remove catch, swing back or remove quick-change knife unit.
BOSS L T
up to 16 knives
BOSS/ERNTEBOSS
up to 22 knives
Low-loader: Top knife bank: 12 quick-change knives. Lower knife bank: 10 knives, central pivoting knife configurations: 1-12 or 10 - 22 knives
High loader: Top knife bank: 4 quick-change knives + 8-knife-bank (= 12). Lower knife bank: 10 knives
Knife configurations: 1-4 / 10 / 12 / 14 / 22

PROFI Grand Prix / ERNTEBOSS
31 knives. Top knife bank: 4 quick-change knives + 12-knife-bank (= 16). Lower knife bank: 15 knives.
Knife configurations: 1-4 / 12 / 15 / 16 / 19 / 27 / 31
  SUPERMATIC!


Central lubrication manifold
for easy maintenance. Standard equipment on PROFI GP and ERNTEBOSS with 31 knives.

Cam track at either end for only half the stress on the control elements. The combs are positioned precisely in each phase.

On all self-loading wagons: all loading combs are fitted with hardened bearing bushes.


The knife banks can be individually pivoted and can simply be lowered to the ground.
Quick-release knives: release catch, remove knife.


31-knife chopping system
available as option with hydraulic pivoting for all ERNTEBOSS and PROFI Grand Prix models.


Comfortable control
   Hydraulic coupling
For hydraulic pickup lift system, or hydraulic scraper floor. The hydraulic coupling can be combined with a hand pump so no hydraulic connection is necessary. Convenient and straightforward operation.(for PONY, BOSS junior 1 and 2)
Cab control unit with preselected programs
Hydraulic cab control unit for
  • Pick-up
  • scraper floor
  • tailgate Comfort version:
  • Hydraulic drawbar
  • Extension
 SELECT CONTROL One-finger operation
All hydraulic functions controlled electronically - no more hydraulic hoses in the cab.
  • Only one single-acting hydraulic connection with return line required.
  • Pick-up, drawbar, scraper floor, tailgate, extension, chopping system are all operated hydraulically.
  • Optional for BOSS junior 2 (with hydraulic scraper floor), BOSS Junior 3, BOSS and PROFI GP, standard for ERNTEBOSS 2 H.
 
Every ERNTEPROFI features electronic controls
The front end control box for the loading functions is always in the cab. Control unit for:
  • pickup
  • drawbar
  • roof extension
  • scraper floor
  • tailgate The two control panels can be joined to form a neat unit.
  
  METERING!


ERNTEBOSS
The metering system at the rear end of the wagon is convenient to operate. The speed of the scraper floor can be regulated to exactly match the throughput of a forage blower.


ERNTEPROFI
The control box for operating the unloading functions can be mounted either next to the front control box, or at the tailgate.


Choice of axles and tyres
   PONY, BOSS, PROFI-GP
Choice of axles
Braked axles, high-loaders fitted with reversible rims (changes track width from 1550 mm to 1750 mm). Bolted axle unit enables tandem axle with suspension to be retrofitted.

Tandem axle with compensating suspension
A compound suspension system (optional) optimises the load distribution to each axle.

Tyres:
  • 15-17, reversible for track width of 1550 and 1750 mm
  • 19.0/45-17, track width 1600 mm

    LADE-/ERNTEPROFI
    With 15-17 tyres the track width can easily be changed from 1550 to 1750 mm by turning the wheels around. On trailers with tandem axles offsetting the track widths of 1550 and 1750 mm will help to distribute the load more evenly. Single axle up to 6.9 t permissible total weight, 25 km/h.

    Dual air brakes for single axle up to 5.6 t permissible total weight, 40 km/h 19.0/45-17/10 PR. Tandem axle up to 8 t permissible total weight, 25 km/h,

    Dual air brakes with ALB for tandem axle up to 9 t permissible weight, 40 km/h 15.0/55-17/10 PR
    Air brakes or hydraulic brakes (varies from country to country)
    • Pneumatic brake system with ALB controller (automatic load-controlled brake system) can be upgraded to ABS as option
    • High degree of safety with higher loads even with the hydraulic braking system.
    • Each wheel is fitted with a brake cylinder as standard
    • Steered axles as option
    • Steered axles to protect the sward and reduce side forces while cornering. The steered axles are locked by a separate hydraulic connection for reversing and higher speeds. Protects the tyres against wear.
   NEAT!


Spring suspension tandem axles
The compound suspension optimises the load distribution to each axle. While driving over bumpy ground the forces are distributed to both axles, not adsorbed by the limit stops. Best control on slopes, same load on each axle, even during braking. Huge leaf springs provide the necessary shock
EUROBOSS 330 D / 370 
Trailer to meet the highest requirements
The EUROBOSS range has also been extended. From the 2006 season the EUROBOSS 330 D will be offered with unloading propotioning, in both a high and a low version. EUROBOSS 370 volume 5.91 ft3 / 37 m3, in the high and low versions.


Dual-row knive bank (31 knives)
  • 16 knives in the top row
  • 15 knives in the lower row
  • Knive spacing: 43 mm
  • Patented pivoting knife bank is also now available with EUROBOSS wagons

     
Wide  Pick-up

　

　

Technical data
EUROBOSS 250 T 250 H 290 T 290 H 330 T / T-D 330 H / H-D 370 T 370 H
Volume [m³]: 25  25  29  29  33  33  37  37 
Type: Low-loader  High-loader  Low-loader  High-loader  Low-loader  High-loader  Low-loader  High-loader 
Volume according to DIN 11741 [m³]: 16,1  16,1  18,7  18,7  21,3  21,3  23,9  23,9 
Pick-up width [mm]: 1800  1800  1800  1800  1800  1800  1800  1800 
Number of knives: 16 / 31  16 / 31  16 / 31  16 / 31  16 / 31  16 / 31  31  31 
Cutting length [mm]: 43  43  43  43  43  43  43  43 
Total length [mm]: 6830  6830  7450  7450  8070  8070  8690  8690 
Total width [mm]: 2110  2110  2110  2110  2110 / 2330  2110 / 2330  2110  2110 
Overall height raised / lowered [mm]: 3070 / 2200  3260 / 2390  3070 / 2200  3260 / 2390  3070 / 2200  3260 / 2390  3070 / 2200  3260 / 2390 
Platform height [mm]: 850  1040  850  1040  850  1040  850  1040 
Loading area [mm]: 3970 x 1560  3970 x 1560  4590 x 1560  4590 x 1560  5210 x 1560  5210 x 1560  5830 x 1560  5830 x 1560 
Approx. weight [kg]: 2450  2450  2550  2550  2650 / 3300  2650 / 3300  3560  3560 
Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.

Standard Equipment

Loader wagon with 31 knife cutting system

Power requirement: from min. 44 KW/60HP  to max. 81KW/110HP

Standard equipment:

Axles:
Low chassis: single axle width 2.02 m, tandem 2.13 m with 15-17
High chassis: single and tandem axle: 1.8 m with reversed rims
Brakes: mechanical hand brake
Tyres: 15,0/55-17 10 ply
Hitch: universal high hitch drawbar, height adjustable with spindle, rigid towing eye
P.T.O.: wide angle P.T.O. drive shaft with cut-out clutch, 540 rpm, max. torque 1150 Nm 
Pick-up: 1.80 m wide with 5 rows of tines and automatic operating device, hydraulic lift system
Loading system: SUPERMATIC loading and cutting system with automatic spring safety device, 3 off-set feeder combs, cam track control at each end, optionally: 1 frame c/w 6 single knives or individual knife banks c/w 16 (necessary for D-models) or 31 knives
Body work: metal sections, dry forage extension (hydraulic on D-model) and sturdy hydr. tailgate (double acting), roof ropes and rear canvas, lighting
D-model: side access door with fold away ladder
Scraper floor: hydraulic scraper floor drive with switch at tailgate
D-version: Rear discharge system, 3 large diameter, removeable beaters
Hydraulic connections: 2 SA valves and 1 open return required
Handling: L-version: Direct Control
D-version: Power Control

　

瑋洲企業有限公司

台灣高雄市前鎮區武德街135巷24號

TEL : 886-7-7169249  Fax : 886-7-7169250

e-mail : agri-machine@weizhou.com.tw

e-Mail : shiu@ksts.seed.net.tw

http://www.weizhou.com.tw/Agrimachine/i-foragewagon/index.htm

 

Skype : service450429

MSN : steveLee73@hotmail.com

　

　

回本網站首業                 回農機首業