Hand-Held Metal Detector
MD-8
ˇ@
MD-8 hand-held metal detector
MD-8
handle Metal Detector that is obtained the national patent (Paten
No:ZL.01310300.8)has functions of open, alarm and voice/light auto-switch. It
can be used in public security detection of airport, railway station, dock,
prison, custom and frontier defense; quality detection of medicine, food and
other commodities; examination of noble metal and detection other important
fields, e.g.: gymkhana. The machine has past the check of product quality in
Shanghai supervision and inspection chief station of public security system,
Report number: Shanghai public security inspection 033167
2.
Characteristic
~Use
and modulate simply; high sensitivity; alarming with voice and light.
~After
opening and waiting for 2 seconds, you can operate it.
~Low
consumption, keep working over 40 hours
~If
6V of battery (9V should be used) is used, detection distance doesnˇ¦t shorten.
When the battery lacks, it will keep alarming.
3.
Detection Distance
~Detecting
pin: 10-30mm
~Detecting
64-type gun: 120mm
~Detecting
6 inch dagger: 130mm
~Detecting
steel ball (dia 20mm): 90mm. (If Max sensitivity is set, it can reach 120mm)
4.
Operation:
~Push
the power button up, the opening-voice can be heard. It begins to work. You can
detect the subject with the detector, when metal is detected, alarm will send
out. When you stop detecting, the alarm stops as well and the green indicator
lights.
~Push
the power button down, the closing-voice can be heard and the green indicator
darkens.
~When
we maxmize the sensitivity, the opening-voice will keep 3-4seconds.After
stopping, you can operate.
5.
Sensitivity adjustment:
~If
the detection distance cannot reach above standard or its sensitivity is
exorbitant, (alarming when detecting human body without metal) you need adjust
the sensitivity. You can push the battery cover to turn it up.
~After
opening the device, you can adjust the potential screw on the circuit board with
screwdriver. Turn it deasil for increasing the sensitivity. Turn it wider shins
for decreasing the sensitivity. After finishing, cover the battery cover.
6.
Replacing Battery:
~Opening
the battery cover, insert new batteries (9V),then cover it again.
7.
Attentions:
~When
the sensitivity is set too high, the device will keep alarming, Reduce its
sensitivity for restoring.
~After
using the detector, pull the power, Take the batteries out when the detector
will not be used for a long time.
~The
detector alarms are as scanning metal and it stops alarming as jibbing to metal.
~If
the detector keeps alarming and the green indicator darkens, you should replace
the batteries.
8.
Guarantee to keep six months on evidence of the invoice and prevention mark.
Weizhou International Co., Ltd
P. O. Box 1394 kaohsiung City. Taiwan ROC
Tel : 886-7-7169249
fax : 886-7-7169250
e-mail : info@weizhou.com.tw
e-mail : shiu@ksts.seed.net.tw
http://www.weizhou.com.tw/military/Index-export.htm
ˇ@
ˇ@
ˇ@
ˇ@