A Division of Ken-Ding Group

Weizhou International Co., Ltd

P. O. Box 1394 Kaohsiung City, Taiwan ROC

Tel : 886-7-7169249         Fax : 886-7-2134620

e-Mail : shiu@ksts.seed.net.tw           e-Mail : steel@weitronic.com.tw  

http://www.weizhou.com.tw/metal&steel/Bearing/Index-english.htm

___________________________________________________________________________________________________

Insert  Bearing

¡@

Insert bearings

    Insert bearings are combined with insert ball bearing two sides sealed  and casting (or stamping steel) bearing pedestal. The inner structure of insert bearing is similar to deep groove bearing. But this bearing's outer ring has a cut spherical outside surface lead to self-aliging,together with concave spherical in bearing pedestal. Usually this kind bearing use top silk, eccentric sets or tight sets fixed inner ring in the shaft, and move together with the axis.

Applications:


    Insert bearing are structure compact and raplace singly, suitable for simple supporting.  Often used in mining, metallurgy, agriculture, chemical industry, conveying machinery etc.in fact, it is changing from deep groove ball bearing, its outer diameter is spherical surface, which can match the concave spherical into housing in corresponding self-aligning.

    Although insert bearing's basic structure is similar with deep groove bearing, this kind of bearing mostly used in relatively rough machine, uncalculative installation, bad axis to neutral, or under the condition of long axis but big deflection, precision of axis itself is not high enough, some structures are rough, so it is worse than deep groove bearing in the same standard.

    For example, insert bearing with top silk is suitable for bearing of bad stiffness and big deflection. This bearing has two sides with sealed which can avoid dirt, it is already filled with moderate lubrication,before install,no cleaning, no lubrication.When top silk screw fixed in inner ring bulge, the allowing of axial load can not over 20%of rated dynamic load.
The basic function between insert ball bearings with eccentric set and insert bearings with top silk is similar, the only difference is top silk is fixed in eccentric set but not the inner ring. Tapered cone is a cone with 1:12 which can be mounted directly in the tapered shaft or installed in the non-shoulder axis by tight set and it can slightly change the bearing clearance.

¡@

¡@

ack Homepage          Back steel & Metal page     Purchase

¡@

¡@