Cost-cutting,
high-speed, time-saving, easy adjustment for broad sizes and
adhesive thickness.Size from 430mm( 17" ) to 1370mm( 54"
) wide to handle panels from 1mm ( 1/16" ) to 45mm (
1-3/4" ) thick, that set roll separation for stock thickness.
Selecting the appropriate grooving for your specific
application is the most important decisions you will make in
designing your process.
Handles
thoroughly handles glue and bond for all types of veneers,
laminates up to thick core stocks, and plywood. Many applications
for flush doors, table tops, flat furniture parts, panels,
cabinets, partitions and many others.
Rolls
are made of high quality material, acid and heat-resistant, and
durable.
Machine are pre-tested and ready to operate. All of glue
spreaders feature safety wire emergency stop system.
|
CONVEYORIZED
GLUE APPLICATOR |
|
|
|
The
conveyorized glue applicator consists of an angle iron
infeed conveyor, a coater roll and an other angle iron
outfeed conveyor.
Optional widths of 12", 16", 18", 20"
are available and conveyors can be extended in 2 feet
increments, Material feed speed rate is set at 63, 45 or
35 feet per minute available. Glue pan can be removed for
clean up and maintenance. |
SPECIFICATIONS
Model |
GLUE ROLL LENGTH |
INFEED CHAIN
LENGTH |
OUTFEED CHAIN
LENGTH |
ACP-163 |
300mm ( 12" ) |
1520mm ( 5' ) |
1520mm ( 5' ) |
ACP-168 |
300mm ( 12" ) |
2440mm ( 8' ) |
2440mm ( 8' ) |
ACP-172 |
400mm ( 16" ) |
2440mm ( 8' ) |
2440mm ( 8' ) |
ACP-173 |
455mm ( 18" ) |
2130mm ( 7' ) |
2130mm ( 7' ) |
ACP-175 |
500mm ( 20" ) |
2440mm ( 8' ) |
2440mm ( 8' ) |
ACP-188 |
500mm ( 20" ) |
3350mm ( 11' ) |
5180mm ( 17' ) |
|
CONVEYORIZED GLUE APPLICATOR
ACP- 175 CA
Model
|
ACP- 175 CA |
working width |
20" |
Machine Weight |
487kgs |
Machine
demensions(cm) |
521 x 77 x 102 |
Packing
dimensions(cm) |
528 x 84 x 109 |
|
|
TABLE
TOP GLUE SPREADER
This glue spreader provides an accurate
application of cabinet doors, table tops, panel gluing or
any other edge that in flat and requires a precision glue
spreading, motorized coater roll with 1/4 HP power.
Coater roll 300mm ( 12" ) long by 150mm ( 6" )
diameter rubber covered roll is hundreds of grooving. Roll
revolves at 65 RPM for the application of PVA and Urea
type glues. The amount of glue spreader is simple
adjusting the wiper blade to apply the amount desired. It
is easy lifting up on the glue pan and roll from the motor
and base for clean up.
|
|