¡@

¡@

¡@

¡@


NC38TSQ

 

¡@


 


NC50TSQ

 


NC80TSQ

 
NC PUSH BOTTOM PANEL TYPE
  • Processed by advance ic chip. more efficient and precise than competitor's similar model machine.
  • Up to 999 bending sequence can be programmed, each with maximum of 9 different bending angles.
  • Bending motion is set and calculated by Japanese made micro encoder, the angle tolerance is ¡Ó0.1.
  • Utilizing the ssr control system, the bending machine is more stable and efficient.
  • Based on the dimension and thickness of working tube. Operator can set delayed timing after each motion.
  • All programmed data and bending sequence can be saved and stored for over 3 years.

FEATURES:

  • Adopting solenoid valve and integrated circuit to control individual motion separately. Extending the life of the hydraulic system parts.
  • Three step hydraulic oil flow system combines the functions of cooling. Sedimentation and preventing deterioration.
  • Large type bending machine is equipped with manual hydraulic adjusting valve to control the speed of bending motion.(This feature can be added to small machine per request).
  • Bending motion is controlled by low speed positioning device to increase the accuracy of desired bending angles.
  • Various angles can be selected to create multiple bending sequence. Eliminating the material loading/UN-loading time, the usage of a separate machine, and accumulating additional labor cost.
  • Both manual and automatic operation are available and all machines are equipped with emergency stop device.
  • The main shaft is specially heat treated. All parts are tested and assembled with strict quality control to meet the specification of ISO 9002 and CE standard.
  • Based on the tube diameter, wall thickness and bending radius, machine operator may select to bend parts with or without a mandrel.
  • The removable axle and easy tool changing design allows no limitation on the minimal bending radius.
  • The range of maximum and minimum bending angle can be increased or decreased based on customer's requirement.
  • We can supply wide range of bending machines capable of bending pipes up to 203MM (8" Diameter).
  • Simple to read and user friendly functions allow NON-Technician and new operator to joint production force rapidly.


NC PUSH BOTTOM PANEL TYPE

 
MODE O.D.*Wall Bending Radius(mm) Bending Degree Horse Power Total Length Total Width Total Height Total Weight Bending Speed Angle
NC-38S 38*2.5 10~350 0¢X~210¢X 5HP 1500mm 700mm 1000mm 700kg 90¢X3~4/sec 9
NC-38TS 20
NC-38SQ 38*2.5 10~350 0¢X~210¢X 5HP 2400mm 700mm 1000mm 900kg 90¢X3~4/sec 9
NC-38TSQ 20
NC-50SQ 60*4 20~450 0¢X~190¢X 10HP 4100mm 1250mm 1350mm 2000kg 90¢X5~6/sec 9
NC-50TSQ 20
NC-80SQ 80*5 30~450 0¢X~190¢X 15HP 4100mm 1300mm 1350mm 2800kg 90¢X7~8/sec 9
NC-80TSQ 20
NC-100SQ 100*6 40~450 0¢X~190¢X 25HP 4800mm 1400mm 1380mm 3600kg 90¢X10~12/sec 9
NC-100TSQ 20
NC-130SQ 130*7 55~450 0¢X~190¢X 35HP 5200mm 1600mm 1400mm 3900kg 90¢X12~14/sec 9
NC-130TSQ 20
NC-160SQ 165*8 70~450 0¢X~190¢X 40HP 5200mm 1700mm 1400mm 4800kg 90¢X13~16/sec 9
NC-160TSQ 20
NC-200SQ 215*10 85~450 0¢X~190¢X 50HP 5600mm 1700mm 1400mm 6600kg 90¢X15~18/sec 9
NC-200TSQ 20
 

Weizhou International Co., Ltd

P. O. Box 1394 kaohsiung City. Taiwan ROC

Tel : 886-7-7169249

fax : 886-7-7169250

e-mail : industry-machine@weizhou.com.tw

e-mail : general@weitronic.com.tw

http://www.weizhou.com.tw/Indmachine/Index.htm

Back-industry machine        Back-Homepage