¡@


NC-38TSQ

 
NC TOUCH SCREEN TYPE
  • 6" grey mode display touch screen simplifies the machine operation and function selection.
  • Controlled by high efficient PLC base, can stored up to 50 sets of bending sequence, each with maximum of 20 different bending angles.
  • Bending motion is sensed and calculated by Japanese made micro encoder, the angle tolerance is ¡Ó0.1.
  • The pressure die is used to support the bending motion, and has the repeat forwarding and retraction function to minimize the die length.
  • The computer system can automatically detect and pinpoint malfunctioning source and allow operator to inspect or correct problems.
  • Utilizing the ssr control system, the bending machine is more stable and efficient.
  • The on board modem can dial up to link with YING LIN factory computer for software upgrade or on line maintenance and bug detection.
  • 2 step mandrel retraction to produce and prefect finished product.
  • Based on the dimension and thickness of working tube, operator can set delayed timing after each motion.
  • All programmed data and bending sequence can be saved and stored for over 3 years. Installing additional battery may prolong the data storage time.
 
FEATURES:
  • Adopting solenoid valve and integrated circuit to control individual motion separately. Extending the life of the hydraulic system parts.
  • Three step hydraulic oil flow system combines the functions of cooling. Sedimentation and preventing deterioration.
  • Large type bending machine is equipped with manual hydraulic adjusting valve to control the speed of bending motion.(This feature can be added to small machine per request).
  • Bending motion is controlled by low speed positioning device to increase the accuracy of desired bending angles.
  • Various angles can be selected to create multiple bending sequence. Eliminating the material loading/UN-loading time, the usage of a separate machine, and accumulating additional labor cost.
  • Both manual and automatic operation are available and all machines are equipped with emergency stop device.
  • The main shaft is specially heat treated. All parts are tested and assembled with strict quality control to meet the specification of ISO 9002 and CE standard.
  • Based on the tube diameter, wall thickness and bending radius, machine operator may select to bend parts with or without a mandrel.
  • The removable axle and easy tool changing design allows no limitation on the minimal bending radius.
  • The range of maximum and minimum bending angle can be increased or decreased based on customer's requirement.
  • We can supply wide range of bending machines capable of bending pipes up to 203MM (8" Diameter).
  • Simple to read and user friendly functions allow NON-Technician and new operator to joint production force rapidly.


NC TOUCH SCREEN TYPE

MODE
O.D.*Wall
Bending Radius(mm)
Bending Degree
Horse Power
Total Length
Total Width
Total Height
Total Weight
Bending Speed
Angle
NC-38S
38*2.5
10~350
0¢X~210¢X
5HP
1500mm
700mm
1000mm
700kg
90¢X3~4/sec
9
NC-38TS
20
NC-38SQ
38*2.5
10~350
0¢X~210¢X
5HP
2400mm
700mm
1000mm
900kg
90¢X3~4/sec
9
NC-38TSQ
20
NC-50SQ
60*4
20~450
0¢X~190¢X
10HP
4100mm
1250mm
1350mm
2000kg
90¢X5~6/sec
9
NC-50TSQ
20
NC-80SQ
80*5
30~450
0¢X~190¢X
15HP
4100mm
1300mm
1350mm
2800kg
90¢X7~8/sec
9
NC-80TSQ
20
NC-100SQ
100*6
40~450
0¢X~190¢X
25HP
4800mm
1400mm
1380mm
3600kg
90¢X10~12/sec
9
NC-100TSQ
20
NC-130SQ
130*7
55~450
0¢X~190¢X
35HP
5200mm
1600mm
1400mm
3900kg
90¢X12~14/sec
9
NC-130TSQ
20
NC-160SQ
165*8
70~450
0¢X~190¢X
40HP
5200mm
1700mm
1400mm
4800kg
90¢X13~16/sec
9
NC-160TSQ
20
NC-200SQ
215*10
85~450
0¢X~190¢X
50HP
5600mm
1700mm
1400mm
6600kg
90¢X15~18/sec
9
NC-200TSQ
20

¡@

Weizhou International Co., Ltd

P. O. Box 1394 kaohsiung City. Taiwan ROC

Tel : 886-7-7169249

fax : 886-7-7169250

e-mail : industry-machine@weizhou.com.tw

e-mail : general@weitronic.com.tw

http://www.weizhou.com.tw/Indmachine/Index.htm

Back-industry machine        Back-Homepage