CR-F38D

CR-F38DC

• This machine (CR-F38) is an improvement of CR-T38. It is capable of providing more than 3 different processing methods and is called "universal machine" in the field of double-bend processing.
• The machine comes with two rotary tables. The rotary angles can be set up according to the shapes of the workpieces.
• The machine is flexible. It can do both front-side bending (same as CR-T38) & inside bending. In addition, this machine can be simply used as a single-bend pipe bender.
• The features of pipes made by this machine:
  (1) Excellent surface flatness and angle.
  (2) Stable quality
  (3) Beautiful appearance without wrinkles.
• Two shafts can do different angle bending. Both of these two angles can be adjusted freely from 0° to 180°.
• Production capacity: produce 720 pcs (Max.) of pipes with two-end bending.
• The distance between the center line of 2 main shafts:
  (1) Front-side bending: 130mm (Min) ~ 1200mm (Max)
  (2) Inside bending: 150mm (Min) ~ 900mm (Max)
• Production capability:
• Front side bending: (Same as CR-T38)
  (1) Produce 1 pipe each time for O.D. 38mm pipe.
  (2) Produce 2 pipes at the same time for O.D. 31.8mm pipe.
  (3) Produce 6 pipes (Max) at the same time for O.D. 22mm & smaller pipes.
• Inside bending: Produce 1 pc each time for O.D. 38mm & smaller pipes.