Refuse Compactor

Garbage Collector

An ecological solution

for city centers

WASTE HANDLING SYSTEMS

TOUGH EQUIPMENT FOR A TOUGH JOB

Discharge

 

 

Professionals avoid :

 

l      underloading of the front axle.

l      Running the vehicle at under

Capacity.

l      overloading the rear axles.

l      high running costs.

The only solution is

AN ORIGINAL COMPACTION SYSTEM

Main features :

l      right direction of the compression

forces.

l      minimum friction, less wear and

therefore less downtime.

l      high compression rate

l      suitable for all types of refuse

l      safe to operate in all circumstances.

 

SIMPLICITY V THE BEST POLICY

The tried and test Ken-Ding MD series has proved to be one of the most successful refuse collection units available over the last few years.

Designed and developed with considerable assistance from the waste industry, the MD series offers a wide range of body sizes, ranging from narrow to standard widths.

The body and tailgate are manufactured from quality high tensile steel achieving high legal payloads.

 

 

STANDARD FEATURES :

l       Manufactured in quality tensile steel.

l       Wide, unobstructed hopper with Hardox steel floor.

l       Continuously welded body sides-no

Rust traps.

l       Fully automatic cycle.

l       Manual over-ride control.

l       Hinged tailgate canopy for easy

Maintenance.

l       Waterproof tailgate with body seal.

l       Automatic tailgate locks.

l       Built in hopper props.

l       Pressure controlled ejection plate.

l       Replaceable slipper blocks.

l       Comprehensive safety features.

l       Low Rave Hight.

Body sizes suitable for chassis from 6 tones to 24 tones. All models can be equipped with arrange of binlifts.

All equipment fully complied with latest requirements.

 

l       Especially designed for an efficient collection in narrow streets and hardly

Places.

l       To be mounted on light range chassis

From 8,000 kg up to 24,000 kg.

l       Low fuel consumption.

l       Low noise operating system.

l       Low maintenance by use of the latest

Technology and new materials.

l       One complete cycle : 15 sec. At 1050 rpm

l       Waterproof loading hopper and loading space.

l       Low hight of loading rave 700-980 mm.

l       Extreme short turning curcle by means of a short overhand.

Capacity : 6 cub.M up to 19 Cub.M

 

Operating controls :

The packing system, electrically controlled by pushbuttons, is locate on the side of the tailgate.

The ejection shield and the lifting/lowering of the tailgate are controlled by buttons locate on the body behind the cab.

 

Hydraulic system :

Working pressure : 180-220 Bar

Counter pressure on ejection shield : 160-210 Bar

Hydraulic rams :

All rams with hardened and chrome plated rods.

Blade     : two double acting rams

Carrier    : two double acting rams

Door lift   : two single acting rams

Ejector    : one telescopic ram

Hydraulic Pump : Gear type

Oil Tank, Oil filters

Materials specifications :

Container construction : tensile strength 520N/mm

Rear container : tensile strength wearing plate

Hopper bottom plate : tensile strength wearing plate.

 

@ @ @

 

A - BODY LENGTH              ( mm )

B - TAILGATE LENGTH          ( mm )

C - HEIGHT ABOVE CHASSIS    ( mm )

D - OVERALL BODY WIDTH     ( mm )

E - WIDTH INSIDE HOPPER      ( mm )

   GROSS VOLUME             (m3)

   NET VOLUME                (m3)

   TOTAL EQUIPMENT WEIGHT (kg)

OTHER BODY SIZES AVAILABLE ON REQUEST

BIN LIFTING DEVICE ( Optional Equipments ) :

This universal bin lift system can handle all standard containers whilst still retaining a low rave height to ease the loading of sack and bulk refuse.

Lifted with cam

120l, 240l, 360l

Lifted with arms

100l, 770l

Lifted with cam

600l, 660l, 770l, 1100l

BIN LIFTING DEVICE, SKIPJACK ( Optional Equipments ) :

 

A demonstration is all that is needed to convince you, so be sure to contact our sales Department soon.

Technical Specifications :

Model

MD06

MD08

MD09

MD10

MD12

Total length +-5%

6300mm

6480mm

6830mm

7500mm

8000mm

Total height +-5%

2500mm

2800mm

Body box length

3000mm

3250mm

3300mm

3800mm

4100mm

Body width

2200mm

2130~2200mm

2200mm

2200mm

2400mm

Body height

1520mm

1820mm

Body capacity

6.m3

8.m3

9.m3

10.m3

12.m3

Rear hopper capacity

0.7 or 1.m3

1.m3

Total capacity

6.7~7.m3

8.7~9.m3

10.m3

11.m3

13.m3

Entrance width

1520 or 1700mm

1700mm

Entrance clearance

About 900mm

Slurry box capacity

100 L

120L

120L

120L

150L

Pressure (max)

2500~3000

Normal pressure

1800~2000

Operation type

Manual or Automatic, single action or continue ( Optional )

Rear hopper lock devices

Hydraulic Automatic lock

@ @ @ @ @ @ @ @

We reserve the right to change specification without prior notice.

A division of Ken-Ding Group

Weizhou International Co., Ltd

P. O. Box 1394 Kaohsiung, Taiwan ROC

Tel : 886-7-7169249   Fax : 886-7-7169250  

e-Mail : shiu@ksts.seed.net.tw            

e-Mail : eng-machine@weizhou.com.tw         

e-Mail : weizhou@ms65.hinet.net

http://www.weizhou.com.tw/Engmachine/e-refuse/index-export.htm

Back Homepage             Back Engineering Machine