1981-2017
36週年
按裝
Installation of elevated lights
- Elevated lights are mounted onto frangible
pedestals
- Where light fixtures have to be set in
elevation and in azimuth, adjustable ball joint pedestals are required
- For unidirectional elevated lights of series
EL 217, the use of adjustable and frangible pedestals type STR-N30 is
mandatory
- Pedestal itself can be mounted either
directly into an elbow tube or onto a base plate, single pole or mast
- Aiming or setting in elevation and in azimuth
is done with the specially designed ERNI adjustment jig according ICAO
recommendations Annex 14
For more details on installation of light
fixtures please refer to the maintenance manual of each light type. ERNI
customer support will be pleased to provide Users and Contractors guidance and
advice on installation.
Installation of inset lights
- Correct position of inset light has to be
determined and marked by a specialized person (e.g. Geometer)
- After having clearly marked the exact
location of the inset light, preparations for drilling the main hole can be
done through specialized staff
- There are two main concepts for installation
holes:
- Cable entry from underneath (vertical
cable entry) where cables are laid in tubes
- Lateral cable entry through a cable slot
(cable entry must be done before setting base)
- Setting the base: In general the shallow base
will be levelled to the surface of the pavement
- To level and fix the shallow base the use of
suitable installation jigs for 8”, 10” and 12” shallow bases and
equipped with markings for toe-in setting is mandatory
- Use suitable tools or jigs for proper
alignment of the base
- Prior to bring in the cast resin, consult
carefully manufacturer's instructions, especially in regards of ambient
temperatures, weather conditions, humidity, condition of the surface and
duration of hardening process
- Prepare cast resin according to
manufacturer's specification
- Set the light fitting properly and in the
correct position
For more details on installation of light
fixtures please refer to the maintenance manual of each light type. ERNI
customer support will be pleased to provide Users and Contractors guidance and
advice on installation
瑋洲企業有限公司
高雄市前鎮區武德街135巷24號
信件請寄:
高雄市郵政信箱1394號
Tel:
(07) 7169249 Fax: (07) 2134620
e-mail
: shiu@ksts.seed.net.tw
e-Mail : air-port@weizhou.com.tw
e-Mail : weizhou@ms65.hinet.net
http://www.weizhou.com.tw/Airport/index.htm
回首頁
回機場設備首頁
請利用即時通訊如下:
QQ :
1467808036 |
skype
: service450429 |
Line ; weizhou1995 |
Wechat : walterhsu1995 |
whatsApp:+886972326392 |
Viber
: +886972326392 |
Twintter : weizhou |
Linked IN : weizhou |
TataoTalk : weizhou1995 |