Operating range

　

• CAT I, II, III

• Aircraft stand manoeuvring guidance (Apron)

• Clearance Bar

• Rapid Exit Taxiway Centreline

• Runway Guard Light

• Stopbar

• Taxiway Centreline

　

Features

　

• 8 inch diameter inset light
• Unidirectional
• Fail-open function
• Connection and operation fully compatible with 2.8A to 6.6A airfield lighting series circuits
• Continuous brightness, fully dimmable
• Extremely reduced maintenance due to:
  • LED technology
  • Seal tight housing concept (protection grade IP68)
  • Scratch-free prism
• Saturated LED colors, no filters required
• Interchangeable top parts with ERNI light fixtures series IL 240 and IL 280
• Low energy consumption: approx. 13 to 18 VA per side
• Lifetime of LED: approx. 100'000 hours under average operating conditions
• Built-in surge protection
• Conducted and radiated emission as per CE EMC regulations
• Seal-tight housing concept including prisms and lenses for long term tightness
• Low protrusion above ground reduces vibrations in light fixture induced by aircraft taxiing gear and other ground vehicles
• Optimal prism protection prevents from mechanical damage
• Connection cable length 30 cm with vulcanised plug
• Options:
  • Scratch-free prism. Long life and easy cleaning
  • Drainage
  • Four screw fixation
  • Available in FAA sizes 10" and 12" (IL 240D series)
  • Light fixing perforations and dimensions according customers requirements

Characteristics Wide Angle Beam for curved sections (CRV)

Table ERNI average | LED
green	yellow	red
150 cd	150 cd	150 cd

Characteristics Standard Beam for straight sections (SST)

Table ERNI average | LED
green	yellow	red
300 cd	300 cd	300 cd

　

　

Compliance with standards

　

ICAO	Annex 14
FAA	AC150/5345-46
IEC	IEC 61827