1981-2017
36週年
機場設備
起飛&降落跑道燈光
IL
272/273
Inset Light
IL 272/273
Runway
High intensity
Operating range
-
CAT I, II, III
-
Runway Centreline
Features
- 8 inch diameter inset light
- Bidirectional
- Toe-in must be adjusted with shallow base
- Single or dual lamp type, directionally switchable (option)
- Seal-tight housing concept including prisms and lenses for long term
tightness results in low maintenance costs
- Low energy consumption and high durability due to sturdy and watertight
aluminium housing (protection grade IP68)
- Optimized heat dissipation increases lamp lifetime considerably
- Interchangeable components concept requires a minimum of parts, most of
them standardized for use in all applications
- Low protrusion above ground reduces vibrations in light fixture
(increases lamp lifetime) induced by aircraft landing gear and other
ground vehicles
- Optimal prism protection prevents from mechanical damage
- Available lamp systems:
- Prefocussed halogen lamp PK30d (6.6A)
Life expectancy 5'000 to 7'000 hours under average operating
conditions
- Halogen cold mirror reflector lamp
Life expectancy 2'500 to 4'000 hours under average operating
conditions
- Prefocussed halogen lamp at various ratings freely available all around
the world (purchase in local currency)
- Various color filters
- No aiming after maintenance and lamp replacement
- Connecting cable length 30 cm with vulcanised plug
- Options:
- Scratch-free prisms. Long life and easy cleaning
- Drainage
- Four screw fixation
- Light fixing perforations and dimensions according customers
requirements
Compliance with standards
ICAO
|
Annex 14
|
FAA
|
AC150/5345-46
|
IEC
|
IEC 61827
|
Inset Light
Shallow Base 8"
Mounting System
Features
- High quality aluminium alloy preventing from galvanic reaction and
corrosion
- Installation of inset lights in flexible and non flexible pavements by
means of glue-in or epoxy method
Shallow Base - Wet system
- Central 100 mm hole
- Flat bottom design or socket piece available
Shallow Base - Dry system
- One-piece waterproof with one or two lateral cable entries (watertight
PG cable glands)
Installation
- Shallow bases are sealed by means of an appropriate resin that maintains
a certain flexibility after having cured
- Dedicated installation jig allows correct positioning and leveling of
the base
- Secondary cable between light fixtures and isolating transformer passes
through cable conduits (tubes) and a vertical cable entry into the shallow
base
- Alternative method: lay cable in saw cuts (kerfs) filled with resin
- Inset light or cover will be fastened with 2 or 4 screws
- Starting torque for lubricated screws is 25 Nm to max 30 Nm
Options
- 0.5 m length pigtail with FAA L-823 receptacle. Opposite cable end
allows easy crimping connection to secondary wires within saw cuts
- Wooden covers are available for temporary installations
- Blind aluminium and steel covers for durable installation in areas with
overrolling traffic
ERNI After Sales Service is at your disposal for any complementary
information on installation procedure
Elevated & Inset Lights
Deep Base/Can
Mounting System
Features
FAA-Specification |
Size |
Application |
L-867 |
B (12") |
Elevated lights EL 210, EL 220 |
L-868 |
A (10") |
Inset lights series IL 240 |
L-868 |
B (12") |
Inset lights series
IL 230, IL 240, IL 250, IL 260
With Adapter Ring: IL 270 and IL 280 |
- Deep bases constructed according to FAA specifications
- Available in all common sizes
- Galvanic plating protects can from corrosion
Deep Base - Wet system
Deep Base - Dry system
- One-piece waterproof with O-Ring groove in top flange to avoid water
entrance and other liquids
- Option: watertight PG cable glands
Installation Elevated lights
- Light fixture is mounted onto the base using a base plate and pedestal
- L-867 deep bases are not designed to withstand overrolling traffic and
can only be used at the edge of traffic areas
Installation Inset Lights
- Installation into paved surfaces
- L-868 deep base is required as they are exposed to loads from
overrolling vehicles and aircrafts
- Options:
- Customer specific requirements including earthing capability
- Deep base can also be used as transformer housing for certain
applications
- Use of blind aluminium covers for a durable installation is
mandatory not only in areas with overrolling traffic but also to
prevent entrance of water and dust
Accessories Deep Base
- Extensions, flanges, spacer-rings and conversion rings have to be
ordered separately
- Standard FAA L-867 deep bases will be delivered with plywood covers
- Wooden covers for all types of deep bases for temporary installations
- Aluminium or steel covers for durable installation in areas with
overrolling traffic
Inset Light
Adapter Ring
Mounting System
Features
- Use of 12"/8" adapter ring requested for installation of
8" inset light fixture into a 12" light base
- Corrosion resistant aluminium alloy
- Installation of 8" inset light with either 2 screws and 2 pins or 4
screws
- Adapter will be mounted with 6 screws onto 12" light base
瑋洲企業有限公司
高雄市前鎮區武德街135巷24號
信件請寄:
高雄市郵政信箱1394號
Tel:
(07) 7169249 Fax: (07) 2134620
e-mail
: shiu@ksts.seed.net.tw
e-Mail : air-port@weizhou.com.tw
e-Mail : weizhou@ms65.hinet.net
http://www.weizhou.com.tw/Airport/index.htm
回首頁
回機場設備首頁
請利用即時通訊如下:
QQ :
1467808036 |
skype
: service450429 |
Line ; weizhou1995 |
Wechat : walterhsu1995 |
whatsApp:+886972326392 |
Viber
: +886972326392 |
Twintter : weizhou |
Linked IN : weizhou |
TataoTalk : weizhou1995 |