青割玉米&青貯草切碎收穫機

WE-MEX 5 型號

產品目錄下載

技術資料  Technical data
長度
Length
2800 mm
寬度
Width
2200 mm
玉米頭重量
Weight with corn header
2150 kg
草頭重量
Weight with grass header
1810 kg
刀具最大數量
Number of knives max.
10 pcs.
玉米頭工作寬度
Working width with corn header
2200 mm
頭工作寬度
Working width with grass header
1900 mm
工作位置高度
High working position
4985 mm
運輸位置高度
High transport position
3160 mm
出料長度
Chute length
3380 mm
玉米頭動力需求
Power requirement with corn header
150 - 220 PS 
草頭電力需求
Power requirement with grass header
120 - 220 PS 
玉米頭傳動系統速度
Driveline speed with corn header
1000 rpm
PTO速度
PTO speed
540 rpm
玉米頭可更換車輪
Interchangeable wheels with corn header
19:19 
草頭可更換車輪
Interchangeable wheels with grass header
23:19 
玉米頭切碎長度
Chopping length with corn header
5 / 7 / 9 mm 
草頭切碎長度
Chopping length with grass header
11 / 15 / 19 mm 
覆蓋範圍
Coverage
0,8 - 1,2 ha/h 
標準裝備   Standard Equipment
安裝
Mounting
後排3點聯動
Rear 3-point linkage 
安裝 (可選)
Mounting (optional)

Front 
安裝類別
Mounting category
Cat. II / 2 
安裝
Mounting
引腳3點聯動 
3 point linkage with pins 
變速箱
Transmission
2飛輪轉速變速箱
shock-absorbed gearbox for 2 flywheel-speeds 
飛輪轉速
Flywheel speed
800 rpm
飛輪
Flywheel
高輸出飛輪與1220mm直徑
中心可調
碳化鎢塗層收割機刀
內置磨削機
High-output flywheel with 1220 mm diameter 
Centrally adjustable 
Tungsten carbide-coated harvester knives 
Built-in grinding unit 
Penetration 470 mm intake width 
4 feed and pre-compression rollers 
Reversible counter blade 
3-position chopped length adjustment 
針對異物保護(可選)
Protection against foreign objects (optional)
Electronic 
拾起
Pick up
Protected by friction clutch 
Hydraulic cylinder for pick up lifting 
玉米頭
Corn header
Flattened maize auger for difficult harvesting conditions 
row-independent for 3 rows 
穀物粉碎機
Grain pulveriser
Proven highly effective grain pulveriser 
2 grain cracker plates 
10 adjustable, rasped-surface paddles 
Deflector per knife 
斜道
Chute
Hydraulic chute and flap adjustment, full-length arc for consistent flow of crop 
PTO輸出軸防護
PTO shaft guarding
C/w freewheel 
PTO輸出軸曲線
PTO shaft profile
1 3/8" 6-splines 
玉米頭PTO轉速
PTO speed corn header
1000 rpm
操作
Operation
electronic DIRECT CONTROL 
液壓連接
Hydraulic connection
1 x single-acting with free flow return line 
電氣連接
Electrical connection
1 x 2-pin Cobo plug 
標準裝備
Standard equipment includes
Smooth inserts instead of cracker plates for wet corn or grass 
Warning triangle 
The proven flywheel system
The combination of precompression feed rollers, exact chopped length with the flywheel and corn cracker guarantees top quality material. All stalks and leaves are finelychopped and grains pulverised for effective rumination. MEX forage harvesters – acknowledged the world over as the benchmark for best chopping quality.

Flywheel
  • Flywheel with 10 centrally-adjustable knives, ideal chopping distance is quickly set.
  • High chute (up to 15.58' / 4.75 m) and high blowing power plus coated blowing paddles.
  • Tungsten-carbide coating on knives and shear bar for smooth and precise chop. The shear bar is also tungsten-carbide coated and reversible.
  • Mounting and adjustment functions are separate for rapid replacement without aff ecting setting.
  • Wear plates in the forager housing can be replaced cost-eff ectively before damage occurs tohousing, important on abrasive soils.

Service - friendly
Service - friendly
  • Precise sharpening of the knives takes only a few minutes with the integrated grinding disc. On the MEX 5 the flywheel can be reversed for sharpening.
  • The header is quickly removed and the feed system simply folded away. Shear bar and feed rollers are easily accessible for cleaning and servicing.

Corn cracker – more nutrients from maize

Corn cracker
Exceptional quality forage in all harvesting conditions. Rapid adaptation to new crop: allows conversion to harvest green maize in no time.

Three key components:
  • Deflector behind each knife
  • Adjustable, rasped-surface blowing paddles.
  • Long, sectioned cracker plate, can easily be replaced with smooth plates

Row-independent header
The huge blowing power of the flywheel ensures trailers are filled up right into the furthest corner. The grinding disc is standard equipment and the flywheel can be adjusted centrally, because only sharp knives and a close chopping distance ensure a tidy, smooth chop. Unrivalled stability, long service life and reliable technology designed for coverage of large areas. 

Row-independent header
  • Working width 6.56' / 2.0 m (3 rows spaced 2.30' / 0.7 m apart).
  • The header is mounted so that it can move up and down independently of the base unit for best ground hugging, lowest working height 0.44' / 135 mm.
  • Powered by a direct drive system, the aggressive rings of teeth on the intake drums ensure loss-free feed in even the most challenging harvest conditions.
  • High ground clearance (1.90' / 580 mm) for road transport and headland turns.
  • Mechanically-driven feed augers on both sides as standard.
  • Mounting: Pivoting drawbar attached to linkage bar between lower links, clevis can be adjusted +/- 0.65' / 200 mm longitudinally. Hydraulic parking stand

Mounting

A Division of Ken-Ding Group

瑋洲企業有限公司
地址: 台灣高雄市前鎮區武德街135巷24號
信件請寄 : 高雄市郵政信箱1394號
Tel: 07-7169249       Fax: 07-2134620

Weizhou International Co., Ltd
Address : No. 24, Lane 135 Wu-de St., Kaohsiung City, Taiwan ROC  80647
Mailing : P. O. Box 1394 kaohsiung City. Taiwan ROC
Tel: 886-7-7169249       Fax: 886-7-2134620

E-MAIL:agri-machine@weizhou.com.tw

http://www.weizhou.com.tw/Agrimachine/i-forageharvester/index.htm

LINE : weizhou1995

Skype : service450429

QQ :  1467808036

回主網站首頁

回農業機械首頁

回青割玉米&牧草切碎收穫機首頁