圓型&方型乾草包切碎機

(適用方型&圓型乾草包)

KD 6616固定式

Bale Processor 6616 , a revolutionary way of processing big bales.

The Bale Processor 6616 features a unique design

Limited by the quantity of electric energy available on most north american farms, VALMETAL engineers demonstrated much common sense and imagination in designing the Bale Processor 6616, a stationary chopper capable of processing big bales with little horse power requirement.

Energy efficient - Contrary to existing models, the grill on the Bale Processor 6616 is fixed while the rotor is adustable.

The penetration of the knives into the bale is controlled by an ingenious system of levers and tensioners, allowing to get the maximum amount of chopped hay without overloading the motor. Also energy efficient, the embedded grill offers no resistance to the pivoting bale, reducing the horse power requirement.

Designed to process all kinds of bales, round or rectangular.

To match the full load amperage of the motor, the height of the rotor can be set, either manually with a crank or as an option, with a motorized kit including a 1/2" H.P. motor and a speed reducer. In its motorized version, the stroke is limited by two micro-switches.

 

Bale Processor 6616, to get all the benefits from the T.M.R.

Inclined design, an important feature

The slanted shape of the Bale Processor 6616 is not to satisfy a designer's fancies. Besides making the loading of big bales easier, purposely, its inclined design contributes to the low power requirement of the Bale Processor 6616. By gravity, the bale leans against the tub wall at the low end of the chopper. Paddles inside the revolving tub behave just like teeth on a gear and keep the bale pivoting on top of the rotor.

Efficient and clean

To prevent spillage and control the dust produced by the rotor, a totally enclosed discharge auger conveyor is bolted under the frame. The U-Trough made of galvanized steel is doubled with a high density polymer liner (UHMW) to avoid build-up and blockage. The 12" auger si directly driven by a speed reducer and a motor.

The ingenious design of the rotor shaft and knife discs offers a spiral pattern for smooth operation which also requires less horsepower. The heavy-duty all steel rotor is designed for low maintenance and easy knife replacement. Smooth knife spacers reduce the possibility of twine wrapping around the rotor shaft.

Here is what the Bale Processor 6616 will do for your herd... and for you.

 

Manual and automatic control panels are availables for the Bale Processor 6616.

In the automatic version, by amperage reading, the automat controls the penetration of the knives into the bale to get the maximum output without overloading the motor. Motors start and stop in sequence.

 

 

 

 

 

 

A Division of Ken-Ding Group

                                       瑋洲企業有限公司

  Weizhou International Co., Ltd

                                                             80647  台灣高雄市前鎮區武德街135巷24號

    Address : No. 24, Lane 135 Wu-de St., Kaohsiung City, Taiwan ROC  80647

                              信件請寄 : 高雄市郵政信箱1394號  Mailing : P. O. Box 1394 kaohsiung City. Taiwan ROC

Tel : 886-7-7169249           Fax : 886-7-2134620

E-MAIL:agri-machine@weizhou.com.tw

http://www.weizhou.com.tw/Agrimachine/balecutter/i-roundbalecutter/index.htm

 

回主網站首頁  

回農業機械首頁

回圓型&方型乾草包切碎機首頁

 

 

QQ : 1467808036 skype : service450429 Line ; weizhou1995
Wechat : walterhsu1995 whatsApp:+886972326392 Viber : +886972326392